GV-DFR1352 Door Frame Card Reader(Rev.B)
Il GV-DFR 1352 è un lettore di schede progettate per essere installato sul telaio della porta per riconoscere le carte di identificazione.
The GV-DFR1352 is a card reader designed to be installed on the door frame for recognizing identification cards. Featured with the Wiegand and RS-485 outputs, the unit can be connected to any standard access control panel. GV-DFR1352 comes with a weather sealed and IP66 compliant housing for outdoor use.
|Frequency||13.56 MHz for ISO14443A ( MIFARE DESFire , MIFARE Plus and MIFARE Classic )|
|Wiegand Interface||Wiegand 26 / 34 bits, distance 30 m (98.43 ft)|
|RS-485||9,600 bps, connect up to 8 GV-DFR1352 units|
|Power Source||DC 7.5V – 12V|
|Power Consumption||60 mA|
|LED||Red, Green and Blue LED|
|Supported ID Formats||Reads GID and UID|
|Operating Temperature||-30 °C ~ 65 °C (-22 °F ~ 149 °F)|
|Operating Humidity||10 ~ 90% RH (non-condensing)|
|Dimensions (W x H x D)||20.9 x 105.6 x 20.5mm (0.8 x 4.2 x 0.8 in)|
|Weight||80 g (0.17 lb)|
|Certification||CE, FCC, RoHS|
|The number of GV-DFR1352 supported by GV-AS Controllers|
1. RS485 interface only supports GeoVision controllers, while Wiegand interface supports both GeoVision and 3rd party controllers (Wiegand 26/34 Bits).
2. GID is only supported by GV-DFR1352 (Rev. B) firmware V1.2 or later.
3. If you are using third-party cards or key fobs, the reader must be under UID mode.
4. Specifications are subject to change without notice.
|GV-AS ID Card & GV-AS ID Key Fob||GV-AS ID Cards and GV-AS ID Key Fobs are ideal for business and residential environment, where access control is important for security reasons. 125 kHz and 13.56 MHz cards and key fobs are available.|
- GV-DFR1352 Card Reader
- Screw x 2
- Screw Anchor x 2
- Front Cover Plate x 2
- Software CD
- Warranty Card
|Item No. (Sales Part No.)||Description|
|520-DFR1352-000||GV-DFR1352 Door Frame Card Reader|