FEATURES | |
|
GV-GF1921 GF Fingerprint Reader
Lettore di impronte digitali, può lavorare con GV-AS / GV-EV Controller e GV-ASManager per creare un sistema di controllo di accesso completo.
Descrizione prodotto

The fingerprint reader can work with GV-AS / GV-EV Controller and GV-ASManager to create a complete access control system. Three types of operation modes are supported: Card + Fingerprint, Fingerprint Only and Card Only.
Models | GV-GF1921 | GV-GF1922 | |
![]() | ![]() | ||
Hardware | |||
Application | Indoor use only | ||
Sensor | Capacitive | Optical | |
Sensing Area (H x W) | 18 x 13 mm (0.71 x 0.51 in) | 20 x 17 mm (0.79 x 0.67 in) | |
Output Interface | DC 30V, 0.3A | ||
Input Interface | 2 Ports, dry-contact | ||
Communication Interface | TCP/IP (LAN / WLAN) | ||
Supported Card | ISO14443A (MIFARE DESFire, MIFARE Plus and MIFARE Classic), 13.56 MHz | ||
Function | |||
Operation Mode | Fingerprint Only, Card + Fingerprint, Card Only | ||
Fingerprint Enrollment | (Fingerprint Only Mode) | TCP/IP | |
(Fingerprint + Card Mode) | |||
Firmware Upgrade | TCP/IP | ||
Number of Fingerprints Stored | 1,900 (for Fingerprint Only mode) | ||
Standalone Function | Yes (for Fingerprint Only mode) | ||
General | |||
Operating Temperature | 0 ~ 50° C (32 ~ 122° F) | ||
Humidity | 10% ~ 90% (no condensation) | ||
Power | DC 7 ~ 15V, Max 250mA | ||
Dimensions (H x W x D) | 138 x 59 x 48 mm (5.43 x 2.32 x 1.89 in) | ||
Weight | 130 g (0.29 lb) | 160 g (0.35 lb) | |
Certification | CE, FCC | ||
The number of GV-GF1921/1922 supported by GV-AS Controllers | |||
Note: 1. For data synchronization with GV-ASController and GV-ASManager through the Ethernet, it only supports the following controller firmware version and software version: * GV-ASManager: V4.0 or later * GV-AS1010 / 1110 and GV-EV48: V1.0 or later * GV-AS210 / 410 / 810: V1.1 or later * GV-AS2110 / 4110 / 8110: V1.23 or later 2. GV-GF1921 / 1922 do not support third-party controllers. 3. All specifications are subject to change without prior notice. |
GV-AS ID Card & GV-AS ID Key Fob | For Card + Fingerprint Mode, the GV-AS ID F Card or GV-AS ID F Key Fob is required. For Card Only Mode, both the GV-AS ID F Card / Key Fob and the GV-AS ID Card / Key Fob are supported. |
- Fingerprint reader
- Data Cable (of 30 cm / 0.98 feet)
- Manager Enroll Card
- Manager Delete Card
- Mounting Plate
- Standard Screw x 2
- Plastic Screw Anchor x 2
- Security Screw
- Torx Wrench
- Connector Wire
- Software CD
- Warranty Card
Item No. (Sales Part No.) | Description |
---|---|
520-GF1922 | GV-GF1922 Fingerprint Reader |
520-GF1921 | GV-GF1921 Fingerprint Reader |