GV-CS1320 2MP H.264 Camera Access Controller con Lettore incorporato

Login per vedere il prezzo

La GV-CS1320 è un nuovo controller di accesso singolo porta con un built-in fotocamera da 2 MP con obiettivo grandangolare e lettore di 13,56 MHz.
Riconosce carte di identità e concede l'accesso a un massimo di 40.000 utenti di conseguenza.
Svolge, inoltre, face detection insieme con la verifica della carta prima che l'accesso può essere concesso (faccia con modalità carta o in modalità scheda solo).

COD: 84-CS13200-0010 Categorie: , ,

Descrizione prodotto



  • 2 MP progressive scan super low lux CMOS
  • Minimum illumination at 0.02 lux
  • Dual streams from H.264 and MJPEG
  • Up to 15 fps at 1920 x 1080
  • Day and night function (with removable IR-cut filter)
  • Built-in IR with effective distance up to 3 m (9.84 ft)
  • Ingress protection (IP66)
  • 12V DC, 2.5A / PoE+ (IEEE 802.3at)
  • Built-in microphone and speaker
  • Wide Dynamic Range (WDR)
  • Built-in micro SD card slot
  • Provides 180° panorama view
  • ONVIF (Profile S, C) conformant


  • Built-in 13.56 MHz Reader (Mifare DESFire, MIFARE Plus and MIFARE Classic)
  • Access by card plus face detection
  • RS-485 and network interface for connecting up to 2 readers

Access Control

  • Enabling different access control modes according to the Authentication Schedule: Card only mode (default), Card and Face Mode
  • 1 door (one-way and two-way control)
  • Bell button (touch pad) for talk mode
  • Receiving live view and capturing snapshots when card is presented
  • Anti-passback (APB) support
  • 2 inputs, dry contact (Door Sensor / Exit Button)
  • 1 relay outputs (30V DC, 0.5A)
RS-485 / Network Connection
PC Connection


GV-CS1320 is an access controller with a built-in 2 MP camera and 13.56 MHz reader.

GV-CS1320 recognizes identification cards and grants access to up to 40,000 users accordingly. With the integration of the wide angle camera, the Card and Face Mode enables GV-CS1320 to perform face detection together with card verification before access can be granted.

Visitors requesting entry permits can also use the bell button (touch pad) to be granted access. When GV-CS1320 is connected to GV-ASManager over the network, GV-ASNotify generates a notification message and snapshot whenever the bell button (touch pad) is activated. The operator can use GV-ASNotify to watch live view and communicate with the surveillance site via the microphone and speaker functions.

The all-in-one solution eliminates the need of installing and maintaining a separate camera in addition to the card reader and a door entry system.

Image Sensor 1/2.8″ progressive scan super low lux CMOS
Picture Elements 1920 (H) x 1080 (V)
Minimum Illumination B/W 0.02 Lux
Shutter Speed Automatic, Manual (1/5 ~ 1/8000 sec)
White Balance Automatic, Manual (2800K ~ 8500K)
S/N Ratio 52 db
Megapixel Yes
Day / Night function Yes (with removable IR-cut filter)
Lens Type Fixed
Focal Length 1.7 mm
Maximum Aperture F/2.5
Mount M12
Image Format 1/2.8″
Horizontal FOV 180°
IR LED Quantity 2
Max. IR Distance 3 m (9.84 ft.)
Video Compression H.264, MJPEG
Video Streaming Dual streams from H.264 and MJPEG
Video Resolution Stream 1 1920 x 1080 (16:9)
Stream 2 640 x 360 (16:9)
Frame Rate 15 fps at 1920 x 1080
* The frame rate and the performance may vary depending on the number of connections and data bitrates (different scenes).
Image Setting Brightness, Contrast, Saturation, Sharpness, Gamma, White Balance, Image Orientation, Shutter Speed
Audio Compression G.711, AAC (Optional)
Local Storage 10/100 Ethernet
Protocol HTTP, HTTPS, TCP, UDP, SMTP, FTP, DHCP, NTP, UPnP, DynDNS, 3GPP/ISMA RTSP, PSIA, SNMP, QoS (DSCP) , ONVIF (Profile S) and (Profile C)
Interface Micro SD card
Connectors Power 2-pin terminal block
Ethernet Ethernet (10/100 Base-T), RJ-45 Connector
Audio Built-in microphone and speaker
RS-485 RS-485 +, RS-485 –
Operating Temperature -20°C ~ 50 °C (-4 °F ~ 122 °F)
Humidity 10% to 90% (no condensation)
Power Source 12V DC, 2.5A / PoE+ (IEEE 802.3at)
Maximum Power Consumption 25.5 W
Regulatory CE, FCC, RCM, RoHS compliant
Dimensions 137 x 80 x 34.5 mm (5.4 x 3.15 x 1.36 in)
Weight 315 g (0.69 lb)
Ingress Protection IP66
Web Interface
Installation Management Web-based configuration
Maintenance Firmware upgrade through Web Browser or Utility
Access from Web Browser Camera live view, change video quality, bandwidth control, image snapshot, audio, picture in picture, picture and picture
Language English / French / Portuguese / Russian / Spanish / Traditional Chinese
Network Storage GV-System (GV-DVR/NVR), GV-VMS
Mobile Phone support embedded 3GPP/ISMA browser
Live Viewing Browser (IE, Edge, Chrome, Firefox)
Access Control / LPR Management GV-ASManager
Number of User Cards embedded 3GPP/ISMA browser
Frequency Browser (IE, Edge, Chrome, Firefox)
Event Buffer GV-ASManager
RS-485 Interface 1 RS-485 interface for GV-Readers (max. 2 readers)
TCP/IP Interface 1 TCP/IP interface for GV-CR420 and GV-GF1921 / 1922
(max. 2 readers)
Communication Protocol TCP/IP
Digital I/O 2 inputs, dry contact NO/NC
1 relay outputs (30V DC, 0.5A)
Supported ID Formats Built-in GID and UID reader


  1. GV-CS1320 does not support 3rd party readers.
  2. To support face detection function, avoid placing the camera reader where the light source is directly behind the subject.
  3. All specifications are subject to change without notice.

Optional devices can expand the capabilities and versatilities of your GV-AS Controllers. Consult your sales representative for more information.

GV-Reader 1352 V2 GV-Reader 1352 V2 is a card reader that uses a 13.56 MHz frequency. It has both Wiegand and RS-485 outputs that can be connected to any standard access control panel.
GV-RK1352 GV-RK1352 is a card reader with keypad that uses a 13.56 MHz frequency. The reader has both Wiegand and RS-485 outputs that can be connected to any standard access control panel.
GV-R1352 GV-R1352 is a card reader that uses a 13.56 MHz frequency. The reader has both Wiegand and RS-485 outputs that can be connected to any standard access control panel.
GV-DFR1352 GV-DFR1352 is a card reader that uses a 13.56 MHz frequency. The reader has both Wiegand and RS-485 outputs that can be connected to any standard access control panel.
GV-GF Fingerprint Reader The reader supports three operation modes: Fingerprint Only, Fingerprint + Card and Card Only. In Fingerprint Only mode, the fingerprints are enrolled through GV-ASManager. In Fingerprint + Card mode, the fingerprint templates are stored on the user card. In Card Only mode, the users only need to swipe the card to be granted access. Readers with optical and capacitance sensors are available.
GV-CR420 GV-CR420 is a card reader with a built-in 4MP wide angle IP camera. The card reader recognizes identification cards and transmits live view through network connection.
Push Button Switch The push button switch can be integrated with access control system, allowing door exit by momentarily activating or deactivating the electric locking device. Both American standard and European standard push buttons are available.
GV-IB25 / 65 / 85 Infrared Button The GV-IB25 / 65 / 85 Infrared Button detects infrared movement within 3 to 12 cm and allows you to open the door with a wave of hand.
Electric Lock Three types of electric locks are available: electromagnetic lock, electric bolt and electric strike.
GV-AS ID Card & GV-AS ID Key Fob GV-AS ID Cards and GV-AS ID Key Fobs are ideal for business and residential environment, where access control is important for security reasons. 125 kHz and 13.56 MHz cards and key fobs are available.
Power Adapter Contact your sales representative for the countries and areas supported.
  • GV-CS1320
  • Mounting Plate
  • Standard Screw x 2
  • Plastic Screw Anchor x 2
  • Security Screw
  • Torx Wrench
  • Silica Gel Bag
  • Micro SD Card 2 GB
  • Software DVD
  • Warranty Card