GV-AS120

GV-AS120 Controller con lettore incorporato

Login per vedere il prezzo

Geovision controller GV AS120 puo' essere usata per programmazione carte ovvero come sistema standalone per il controllo di 1 porta. Supporta fino 1.000 utenti solo o fino 40.000 tramite rete.

COD: 86-AS12056-001D Categorie: ,

Descrizione prodotto

GV-AS120
  • 1,000 / 40,000 cards (standalone / networked or RS-485 mode)
  • Built-in 2 digital inputs and 1 relay output
  • 1 Wiegand output (26 ~ 64 bits) for extra reader programming
  • 1 door expandable to 2 doors with optional GV-ASBox
  • Built-in tampering alarm
  • Weather-proof and IP66-compliant housing (for outdoor use)
  • Built-in 13.56MHz Reader

In modalita stand-alone, il controller Geovision GV-AS120 è un lettore di carte ed anche un singolo controller di porta. È possibile aggiungere un GV lettore di carte di più per GV-AS120 per l’entrata e l’uscita delle applicazioni. GV-AS120 ha la capacità di memorizzare fino a 1.000 carte da sollo o fino 40.000 tramite rete . GV-AS120, quando viene utilizzato come unità indipendente, la programmazione è effettuata dal software GV-ASManager attraverso la connessione RS-485.

Specifications
System Requirements
GV-ASManager VersionGV-ASManager V3.0 or later
Hardware
CPU32-bit RISC microprocessor
Number of User Cards1,000 / 40,000 cards (standalone / networked or RS-485 mode)
Frequency13.56 MHz for ISO14443A (MIFARE DESFire, MIFARE Plus and MIFARE Classic)
Event Buffer65,536 events and log data
Power100 ~ 240V AC, 50 ~ 60Hz
Wiegand Interface1 Wiegand interface, 26 ~ 64 bit format
12V DC Power Supply, 200mA
Communication ProtocolRS-485
Digital I/OInput2 inputs, dry contact, NO / NC
Output1 outputs
Supported ID FormatBuilt-in reader reads UID only
Operating Temperature-35 °C ~ 65 °C (-31 °F ~ 149 °F)
Operating Humidity10 ~ 90% RH (non-condensing)
Dimensions (W x H x D)65.8 x 115.6 x 20.5 mm (2.6 x 4.6 x 0.8 in)
Weight138 g (0.3 lb)
Ingress ProtectionIP66
CertificationCE, FCC, RoHS

Note:
1. RS485 interface only supports GeoVision readers, while Wiegand interface supports both GeoVision and 3rd party readers (Wiegand 26~64 Bits).
2. GV-AS Controller does not support 3rd party access control software
3. GV-AS120 is a controller with a built-in card reader. GV-AS120 cannot be used as an independent card reader.
4. Specifications are subject to change without notice.

Optional devices can expand the capabilities and versatilities of your GV-AS Controllers. Consult your sales representative for more information.
GV-Reader 1251GV-Reader 1251 is a card reader that uses a 125 kHz frequency. It has both Wiegand and RS-485 outputs that can be connected to any standard access control panel.
GV-RK1352GV-RK1352 is a card reader with keypad that uses a 13.56 MHz frequency. The reader has both Wiegand and RS-485 outputs that can be connected to any standard access control panel.
GV-R1352GV-R1352 is a card reader that uses a 13.56 MHz frequency. The reader has both Wiegand and RS-485 outputs that can be connected to any standard access control panel.
GV-DFR1352GV-DFR1352 is a card reader that uses a 13.56 MHz frequency. The reader has both Wiegand and RS-485 outputs that can be connected to any standard access control panel.
GV-GF Fingerprint ReaderThe reader supports three operation modes: Fingerprint Only, Fingerprint + Card and Card Only. In Fingerprint Only mode, the fingerprints are enrolled through GV-ASManager. In Fingerprint + Card mode, the fingerprint templates are stored on the user card. In Card Only mode, the users only need to swipe the card to be granted access. Readers with optical and capacitance sensors are available.
GV-CR420GV-CR420 is a card reader with a built-in 4MP wide angle IP camera. The card reader recognizes identification cards and transmits live view through network connection.
GV-ASBoxOnly works with GV-AS100 / 110 / 120. The device can add Network function, 1 Wiegand interface, 8 additional inputs and outputs to GV-AS100, GV-AS110 and GV-AS120.
GV-ASNetOnly works with GV-AS100 / 110 / 120. This device can add Network function to GV-AS100, GV-AS110 and GV-AS120.
GV-HUB V2Only works with GV-AS100 / 110 / 120. GV-Hub V2 can convert the standard RS-232 signal of up to 4 controllers to RS-485, allowing the controllers to connect to computers.
GV-COM V2Only works with GV-AS100 / 110 / 120. GV-COM V2 can convert the standard RS-232 signal of one controller to RS-485, allowing the controller to connect to a computer.
GV-COM V3Only works with GV-AS100 / 110 / 120. GV-COM V3 can convert the standard RS-232 signal of one controller to RS-485, allowing the controller to connect to a computer.
GV-Net / IO CardOnly works with GV-AS100 / 110 / 120. GV-Net / IO Card can convert the standard RS-232 signal of one controller to RS-485, allowing the controller to connect to a computer.
Push Button SwitchThe push button switch can be integrated with access control system, allowing door exit by momentarily activating or deactivating the electric locking device. Both American standard and European standard push buttons are available.
GV-IB25 / 65 / 85 Infrared ButtonThe GV-IB25 / 65 / 85 Infrared Button detects infrared movement within 3 to 12 cm and allows you to open the door with a wave of hand.
Electric LockThree types of electric locks are available: electromagnetic lock, electric bolt and electric strike.
GV-AS ID Card & GV-AS ID Key FobGV-AS ID Cards and GV-AS ID Key Fobs are ideal for business and residential environment, where access control is important for security reasons. 125 kHz and 13.56 MHz cards and key fobs are available.
  • GV-AS120
  • Power Adaptor 12V DC / 1.25A
  • Power Cord
  • Screw x 3
  • Screw Anchor x 2
  • Security Torx
  • Enroll Card
  • Delete Card
  • GV-AS ID F Card x 20
  • Warranty Card
Item No. (Sales Part No.)Description
510-AS120-000GV-AS120 with GV-AS ID F Card x 20 AU
510-AS120-000GV-AS120 with GV-AS ID F Card x 20 AR
510-AS120-000GV-AS120 with GV-AS ID F Card x 20 UK
510-AS120-000GV-AS120 with GV-AS ID F Card x 20 EU
510-AS120-000GV-AS120 with GV-AS ID F Card x 20 US