GV-AS1110

GV-AS1110 IP Controller con lettore incorporato

Login per vedere il prezzo

GV-AS1110 è un singolo controller di porta con un lettore incorporato.
La porta di rete TCP / IP su GV-AS1110 permette di aggiungere altri due lettori di schede di rete per le applicazioni di entrata e di uscita.

COD: 86-AS11100-010D Categorie: ,

Descrizione prodotto

GV-AS1110
  • 1 door (one-way and two-way control)
  • 1,000 / 40,000 cards (standalone / networked mode)
  • Easy programming from keypad
  • Built-in 2 digital inputs and 1 relay outputs
  • 1 network interface for connection with GV-ASManager and up to 2 TCP/IP reader
  • Built-in 13.56 MHz Reader
  • Built-in tampering alarm sensor
  • Weather-proof and IP66-compliant housing (for outdoor use)
  • Anti-Passback (APB) support

GV-AS1110 è un singolo controller di porta con un lettore incorporato. La porta di rete TCP / IP su GV-AS1110 permette di aggiungere altri due lettori di schede di rete per le applicazioni di entrata e di uscita. GV-AS1110 ha la capacità di memorizzare fino a un migliaio di carte in modalità stand-alone e fino a 40.000 carte quando collegata a GV-ASManager. La programmazione di GV-AS1110 può essere effettuato sia sulla tastiera o dal software GV-ASManager. GV-AS1110 è adatto per il controllo di porte, portoni di parcheggio e l’accesso all’ascensore pulsanti di chiamata.

System Requirements
GV-ASManager VersionGV-ASManager V4.2.3 or later
Hardware
CPU32-bit ARM7TDMI
Number of User Cards1,000 / 40,000 cards (standalone / networked mode)
Frequency13.56 MHz for ISO14443A (Mifare DESFire, Mifare Plus and Mifare Classic)
Event Buffer65,536 events and log data
Power100 ~ 240V AC, 50 ~ 60Hz
TCP/IP Interface1 TCP/IP interface for GV-CR420 and GV-GF1921 / 1922
Communication ProtocolTCP/IP
Digital I/OInput2 inputs, dry contact, NO / NC
Output1 relay output (30V DC, 1A; 110V AC~250V AC, 0.3A)
Supported ID FormatsBuilt-in reader reads both GID and UID
Operating Temperature-35 °C ~ 65 °C (-31 °F ~ 149 °F)
Operating Humidity10 ~ 90% RH (non-condensing)
Dimensions (W x H x D)95 x 108 x 23 mm (3.74 x 4.25 x 0.91 in)
Weight270 g / 0.59 lb
Ingress ProtectionIP66
CertificationCE, FCC, RoHS

1. GV-AS1110 does not support 3rd party access control software and 3rd party readers.
2. GV-AS1110 is a controller with a built-in card reader. GV-AS1110 cannot be used as an independent card reader.
3. If you are using third-party cards or key fobs, the reader must be under UID mode.
4. Specifications are subject to change without notice.

Optional devices can expand the capabilities and versatilities of your GV-AS Controllers. Consult your sales representative for more information.

GV-GF Fingerprint ReaderGV-AS1110 is compatible with GV-GF1921 / 1922. The reader supports three operation modes: Fingerprint Only, Fingerprint + Card and Card Only. In Fingerprint Only mode, the fingerprints are enrolled through GV-ASManager. In Fingerprint + Card mode, the fingerprint templates are stored on the user card. In Card Only mode, the users only need to swipe the card to be granted access. Readers with optical and capacitance sensors are available.
GV-CR420GV-CR420 is a card reader with a built-in 4MP wide angle IP camera. The card reader recognizes identification cards and transmits live view through network connection.
GV-MountA900GV-MountA900 is a mounting plate that allows you to attach GV-AS110, GV-AS1110, GV-RK1352, or GV-R1352 to a US single gang power box.
Push Button SwitchThe push button switch can be integrated with access control system, allowing door exit by momentarily activating or deactivating the electric locking device. Both American standard and European standard push buttons are available.
GV-IB25 / 65 / 85 Infrared ButtonThe GV-IB25 / 65 / 85 Infrared Button detects infrared movement within 3 to 12 cm and allows you to open the door with a wave of hand.
Electric LockThree types of electric locks are available: electromagnetic lock, electric bolt and electric strike.
GV-AS ID Card & GV-AS ID Key FobGV-AS ID Cards and GV-AS ID Key Fobs are ideal for business and residential environment, where access control is important for security reasons. 125 kHz and 13.56 MHz cards and key fobs are available.
GV-MountA900GV-MountA900 is a mounting plate that allows you to attach GV-AS110, GV-AS1110, GV-RK1352, or GV-R1352 to a US single gang power box.
Power Box Mount

ModelDimensionSupported Power Box Type
GV-MountA900100 x 68 mm (3.9 x 2.7″)Single Gang (US standard)
  • GV-AS1110
  • Power Adaptor 12V DC / 1.25A
  • DC Wire
  • Screw x 2
  • Screw Anchor x 2
  • Front Cover Plate x 2
  • Enroll Card
  • Delete Card
  • GV-AS ID F Card x 20
  • Software CD
  • Warranty Card

 

Connecting GV-AS Controller to GV-Reader via TCP/IP
Installing GV-AS1110 with GV-Mount A900