GV-AS1010

GV-AS1010 controller IP con built-in lettore presenze e tasti funzione

Login per vedere il prezzo

GV-AS1010 è un unico controller porta con lettore incorporato.
Fornisce un'interfaccia di comunicazione TCP / IP per PC e supporta anche la funzione di tempo e di presenza in GV-ASManager, un controllo degli accessi e software di gestione.
E 'possibile aggiungere più di due lettori di schede GV-AS1010 per applicazioni di entrata e di uscita.
GV-AS1010 ha la capacità di memorizzare fino a 40.000 carte quando è collegato al GV-ASManager.
La programmazione del GV-AS1010 può essere effettuata sia sulla tastiera o dal GV-ASManager.
GV-AS1010 è adatto per il controllo di porte, portoni di parcheggio e l'accesso all'ascensore pulsanti di chiamata.

COD: 86-AS10156-001D Categorie: ,

Descrizione prodotto

GV-AS1010
  • 1 door (one-way and two-way control)
  • 1,000 / 40,000 cards (standalone / networked mode)
  • Easy programming from keypad
  • Function keys on keypad to register attendance data for GV-TAWeb
  • Built-in 3 digital inputs and 2 relay outputs
  • 1 RS-485 interface for connecting to up to 2 readers
  • 1 network interface for connection with GV-ASManager and TCP/IP reader
  • Built-in 13.56 MHz Reader
  • Built-in tampering alarm sensor
  • Anti-Passback (APB) support
Connection
Function Keys
Before employees present their access card to GV-AS1010, they can press the function keys to indicate it is the start or end of Work Time, Away, Overtime or Break Time. You can look up the attendance data in GV-TAWeb, the time and attendance system in GV-ASManager.

Introduzione
GV-AS1010 è un unico controller porta con lettore incorporato.
Fornisce un’interfaccia di comunicazione TCP / IP per PC e supporta anche la funzione di tempo e di presenza in GV-ASManager, un controllo degli accessi e software di gestione.
E ‘possibile aggiungere più di due lettori di schede GV-AS1010 per applicazioni di entrata e di uscita.
GV-AS1010 ha la capacità di memorizzare fino a 40.000 carte quando è collegato al GV-ASManager.
La programmazione del GV-AS1010 può essere effettuata sia sulla tastiera o dal GV-ASManager.
GV-AS1010 è adatto per il controllo di porte, portoni di parcheggio e l’accesso all’ascensore pulsanti di chiamata.

System Requirements
GV-ASManager VersionGV-ASManager V4.2.3 or later
Hardware
CPU32-bit ARM7TDMI
Number of User Cards1,000 / 40,000 cards (standalone / networked mode)
Frequency13.56 MHz for ISO14443A (Mifare DESFire, Mifare Plus and Mifare Classic)
Event Buffer65,536 events and log data
Power100 ~ 240V AC, 50 ~ 60Hz
RS-485 Interface1 RS-485 interface for GV-Readers and GV-GF Fingerprint Readers (max. 2 readers)
TCP/IP Interface1 TCP/IP interface for GV-CR420 and GV-GF1921 / 1922
Communication ProtocolTCP/IP
Digital I/OInput3 inputs, dry contact, NO / NC
Output2 relay outputs (30V DC, 5A; 110V AC ~ 250V AC, 5A )
Function Keys on KeypadYes
Supported ID FormatsBuilt-in reader reads both GID and UID
Operating Temperature0 ~ 65°C / 32 ~ 149°F
Operating Humidity10% ~ 90% RH (non-condensing)
Dimension (W x H x T)96 x 137 x 27 mm / 3.78 x 5.39 x 1.06 in
Weight250 g / 0.55 lb
Ingress ProtectionIP54
CertificationCE, FCC, RoHS

1. GV-AS1010 does not support 3rd party access control software and 3rd party readers.
2. GV-AS1010 is a controller with a built-in card reader. GV-AS1010 cannot be used as an independent card reader.
3. If you are using third-party cards or key fobs, the reader must be under UID mode.
4. Specifications are subject to change without notice.

Optional devices can expand the capabilities and versatilities of your GV-AS Controllers. Consult your sales representative for more information.

GV-Reader 1352 V2GV-Reader 1352 V2 is a card reader that uses a 13.56 MHz frequency. It has both Wiegand and RS-485 outputs that can be connected to any standard access control panel.
GV-RK1352GV-RK1352 is a card reader with keypad that uses a 13.56 MHz frequency. The reader has both Wiegand and RS-485 outputs that can be connected to any standard access control panel.
GV-R1352GV-R1352 is a card reader that uses a 13.56 MHz frequency. The reader has both Wiegand and RS-485 outputs that can be connected to any standard access control panel.
GV-DFR1352GV-DFR1352 is a card reader that uses a 13.56 MHz frequency. The reader has both Wiegand and RS-485 outputs that can be connected to any standard access control panel.
GV-GF Fingerprint ReaderGV-AS1010 is compatible with GV-GF1921 / 1922. The reader supports three operation modes: Fingerprint Only, Fingerprint + Card and Card Only. In Fingerprint Only mode, the fingerprints are enrolled through GV-ASManager. In Fingerprint + Card mode, the fingerprint templates are stored on the user card. In Card Only mode, the users only need to swipe the card to be granted access. Readers with optical and capacitance sensors are available.
Push Button SwitchThe push button switch can be integrated with access control system, allowing door exit by momentarily activating or deactivating the electric locking device. Both American standard and European standard push buttons are available.
GV-IB25 / 65 / 85 Infrared ButtonThe GV-IB25 / 65 / 85 Infrared Button detects infrared movement within 3 to 12 cm and allows you to open the door with a wave of hand.
Electric LockThree types of electric locks are available: electromagnetic lock, electric bolt and electric strike.
GV-AS ID Card & GV-AS ID Key FobGV-AS ID Cards and GV-AS ID Key Fobs are ideal for business and residential environment, where access control is important for security reasons. 125 kHz and 13.56 MHz cards and key fobs are available.
  • GV-AS1010
  • Power Adaptor 12V DC / 1.25A
  • Screw x 3
  • Screw Anchor x 2
  • Enroll Card
  • Delete Card
  • GV-AS ID F Card x 20
  • Torx Wrench
  • Software CD
  • Warranty Card

 

Using Function Keys of GV-AS1010 to Register Attendance Data
Connecting GV-AS Controller to GV-Reader via TCP/IP
Installing GV-AS1010