- 1,000 / 40,000 cards (standalone / networked mode or RS-485 mode)
- Easy programming from keypad
- Built-in 3 digital inputs and 2 relay outputs
- One Weigand output (26 ~ 64 bits) and 1 RS-485 interface for extra reader programming
- Built-in 13.56MHz Reader
- Built-in Tampering Alarm
- Anti-Passback (APB) support
GV-AS100 Controller con built-in lettore
Geovision tastiera GV AS100 puo' essere usata per programmazione carte ovvero come sistema standalone per il controllo di 1 porta.
Supporta fino 1.000 utenti.
In modalita stand-alone, la tastiera Geovision GV-AS100 è un lettore di carte ed anche un singolo controller di porta.
È possibile aggiungere un GV lettore di carte di più per GV-AS100 per l’entrata e l’uscita delle applicazioni. GV-AS100 ha la capacità di memorizzare fino a mille carte. GV-AS100, quando viene utilizzato come unità indipendente sia la programmazione è effettuata sulla tastiera o dal software GV-ASManager attraverso la connessione RS-485. GV-AS100 è adatto non solo per un controllo della porta, ma anche per l’entrata del parcheggio e di controllo di un ascensore.
|GV-ASManager Version||GV-ASManager V2.1 or later|
|CPU||8-bit RISC microprocessor|
|Number of User Cards||1,000 / 40,000 cards (standalone / networked or RS-485 mode)|
|Frequency||13.56 MHz for ISO14443A (MIFARE DESFire, MIFARE Plus and MIFARE Classic)|
|Event Buffer||65,536 events and log data|
|Power||100 ~ 240V AC, 50 ~ 60Hz|
|Wiegand Interface||1 Wiegand interface, 26 ~ 64 bit format|
|12V DC Power Supply, 200mA|
|RS-485 Interface||1 RS-485 interface only for 1 GV-Reader or GV-GF Fingerprint Reader|
|Digital I/O||Input||3 inputs, dry contact, NO / NC|
|Supported ID Format||Built-in reader reads UID only|
|Operating Temperature||0 ~ 65°C / 32 ~ 149°F|
|Operating Humidity||10% ~ 90% RH (non-condensing)|
|Dimension (W x H x T)||96 x 137 x 27 mm / 3.78 x 5.39 x 1.06 in|
|Weight||250 g / 0.55 lb|
|Certification||CE, FCC, RoHS|
1. RS485 interface only supports GeoVision readers, while Wiegand interface supports both GeoVision and 3rd party readers (Wiegand 26~64 Bits).
2. GV-AS Controller does not support 3rd party access control software
3. GV-AS100 is a controller with a built-in card reader. GV-AS100 cannot be used as an independent card reader.
4. Specifications are subject to change without notice.
Optional devices can expand the capabilities and versatilities of your GV-AS Controllers. Consult your sales representative for more information.
|GV-Reader 1251||GV-Reader 1251 is a card reader that uses a 125 kHz frequency. It has both Wiegand and RS-485 outputs that can be connected to any standard access control panel.|
|GV-RK1352||GV-RK1352 is a card reader with keypad that uses a 13.56 MHz frequency. The reader has both Wiegand and RS-485 outputs that can be connected to any standard access control panel.|
|GV-R1352||GV-R1352 is a card reader that uses a 13.56 MHz frequency. The reader has both Wiegand and RS-485 outputs that can be connected to any standard access control panel.|
|GV-DFR1352||GV-DFR1352 is a card reader that uses a 13.56 MHz frequency. The reader has both Wiegand and RS-485 outputs that can be connected to any standard access control panel.|
|GV-GF Fingerprint Reader||The reader supports three operation modes: Fingerprint Only, Fingerprint + Card and Card Only. In Fingerprint Only mode, the fingerprints are enrolled through GV-ASManager. In Fingerprint + Card mode, the fingerprint templates are stored on the user card. In Card Only mode, the users only need to swipe the card to be granted access. Readers with optical and capacitance sensors are available.|
|GV-CR420||GV-CR420 is a card reader with a built-in 4MP wide angle IP camera. The card reader recognizes identification cards and transmits live view through network connection.|
|GV-ASBox||Only works with GV-AS100 / 110 / 120. The device can add Network function, 1 Wiegand interface, 8 additional inputs and outputs to GV-AS100, GV-AS110 and GV-AS120.|
|GV-ASNet||Only works with GV-AS100 / 110 / 120. This device can add Network function to GV-AS100, GV-AS110 and GV-AS120.|
|GV-HUB V2||Only works with GV-AS100 / 110 / 120. GV-Hub V2 can convert the standard RS-232 signal of up to 4 controllers to RS-485, allowing the controllers to connect to computers.|
|GV-COM V2||Only works with GV-AS100 / 110 / 120. GV-COM V2 can convert the standard RS-232 signal of one controller to RS-485, allowing the controller to connect to a computer.|
|GV-COM V3||Only works with GV-AS100 / 110 / 120. GV-COM V3 can convert the standard RS-232 signal of one controller to RS-485, allowing the controller to connect to a computer.|
|GV-Net / IO Card||Only works with GV-AS100 / 110 / 120. GV-Net / IO Card can convert the standard RS-232 signal of one controller to RS-485, allowing the controller to connect to a computer.|
|Push Button Switch||The push button switch can be integrated with access control system, allowing door exit by momentarily activating or deactivating the electric locking device. Both American standard and European standard push buttons are available.|
|GV-IB25 / 65 / 85 Infrared Button||The GV-IB25 / 65 / 85 Infrared Button detects infrared movement within 3 to 12 cm and allows you to open the door with a wave of hand.|
|Electric Lock||Three types of electric locks are available: electromagnetic lock, electric bolt and electric strike.|
|GV-AS ID Card & GV-AS ID Key Fob||GV-AS ID Cards and GV-AS ID Key Fobs are ideal for business and residential environment, where access control is important for security reasons. 125 kHz and 13.56 MHz cards and key fobs are available.|
- Power Adaptor 12V DC / 1A
- Power Cord
- Screw x 3
- Screw Anchor x 2
- Master Card
- GV-AS ID F Card x 20
- Warranty Card
|Item No. (Sales Part No.)||Description|
|510-AS100-000||GV-AS100 with GV-AS ID F Card x 20|